Tools
Metal Fume Fever
Introduction
Metal fume fever is a self-limited febrile illness that occurs in those individuals that fuse metals, such as welders. Welders also are involved in filling indentations and seams in the metal. Metal fume fever presents as a flu-like syndrome occurring shortly after these activities and others where metals are bound together. Improvement occurs over the course of the work week, but re-ex-exposure after return to work results in a return of symptoms, such as fever, malaise, and wheezing. For this reason, it is sometimes called "Monday morning fever." The first reported cases were in the 1830s. The association between metal oxides with symptoms of fever, dyspnea, and muscle aches was proven when Lehmann exposed himself and four volunteers to gaseous products of the welding process, including zinc oxide.[1]
The Bureau of Labor Statistics reports that the syndrome of metal fume fever is seen most often in welders, cutters, brazers, and solderers. Welders use many different techniques. The most common is using electric currents to create heat, slightly melt metals, and bond them together. Arc welding produces currents to create intense heat, which melts metals and facilitates bonding. The process chosen depends on the metals to be bonded. Zinc is the most common metal involved in these bonding procedures.
"Cutters" use an ionized gas called plasma, also of intense heat, to trim metal objects to specific dimensions. Plasma cutters may be involved in dismantling large objects such as ships, railroad cars, and buildings. Solderers and brazers use a third metal to join two or more other metal objects. Solderers typically work with small metal pieces that must be positioned precisely, for example, transistors or computer chips. Brazers connect dissimilar metals through the agency of filler material, thereby producing strong joints between multiple metals. Brazers may also apply coatings to protect against corrosion and wear.
Exposure to metal fumes has caused recognized illness for about 200 years and has been known under several names such as Monday fever, brass founders' ague, welders ague, smelter chills, and zinc shakes.[2] Exposure is from inhaling fumes during the welding process or cutting galvanized metal. Galvanization is a process by which a zinc coating is applied to steel. This process protects the steel from oxidation, corrosion, and weakening.
Etiology
Register For Free And Read The Full Article
Search engine and full access to all medical articles- 10 free questions in your specialty
- Free CME/CE Activities
- Free daily question in your email
- Save favorite articles to your dashboard
- Emails offering discounts
Learn more about a Subscription to StatPearls Point-of-Care
Etiology
During welding, metals become superhot and let off vapors that condense, oxidize, and are then inhaled. These superheated metals include zinc, iron, cadmium, manganese, chromium, and nickel.[3] About 30% of middle-aged welders had one episode during their careers.[4] The most common cause is zinc oxide, ZnO, generated from molten bronze or galvanized steel.
Epidemiology
Over 420,000 persons were involved in these metal applications in the United States in 2020, according to the Bureau of Labor Statistics, with about 2000 cases estimated for metal fume fever. Many metal workers, even plumbers and pipe fitters, who weld intermittently, are affected.[5] Artists and "do-it-yourselfers" may occasionally use welding and can present with metal fume fever. Ninety-six percent are men, and only about half are occupational. The most characteristic of metal fume fever is the appearance of symptoms on Monday and Tuesday and no symptoms on Sundays. Based on data from Louisiana Poison Control Center, in which 26 cases were reported over two years, 75% only reported and sought no further medical care. Four were evaluated in the emergency department, and only one was admitted to the hospital.[6]
Pathophysiology
Zinc, cadmium, iron, and aluminum oxides are the most common metals involved in metal fume fever. Cadmium may produce a syndrome of pneumonitis, hypoxia, and even death, which in many respects is distinct from metal fume fever.[7] National Institute for Occupational Safety and Health (NIOSH) and other exposure limits exist, but in general, zinc oxide fumes of 75 to 600 mg of zinc per cubic meter for 1 to 3 hours are needed to produce the syndrome. Interestingly, aerosolized zinc oxide powder does not produce the symptoms, whereas fresh zinc oxide does. The difference has been ascribed to the differential in the size of the particles.[8] Zinc oxide powder particles are much larger than freshly produced zinc oxide.[1] Ultrafine particles less than one micron in size drive much of the pathologic effects of metal fumes.[9][8] There may be a type 1 hypersensitivity that may manifest as an angioedema allergic reaction.[10] Pulmonary function testing may show marked bronchospasm.[11]
Bronchoalveolar lavage of zinc oxide exposed volunteers demonstrates elevated interleukin 6, interleukin 8, and tumor necrosis factor in the bronchoalveolar lavage fluid.[12][13][14] The tumor necrosis factor-alpha peaks at 3 hours post-exposure and seems to have a large role in metal fume fever. These cytokine agents may be the pyrogens seen in this syndrome. The lung is the major source of cytokines and is the organ most affected by these inflammatory agents. The interplay of these immune actors promotes inflammation causing neutrophil recruitment and systemic response, such as fever.
Metallothionein-transport proteins, mostly found in the cell's Golgi-apparatus, may modulate the response to metal oxides, and it has been hypothesized that this may impact the clinical response to metal fume fever.[15][16]
History and Physical
Over 90 percent of cases are mild.[1] Typically they manifest with flu-like symptoms of fever, myalgias, arthralgias, headache, wheezing, an intense thirst, and a metallic taste in the mouth which occur between 4 and 10 hours after stopping exposure to metal binding fumes.[17][4][18]
Pulse oximetry is generally normal. Affected individuals have symptoms that peak at 18 hours and typically disappear within twenty-four to forty-eight hours. Occasionally cases are more severe with pneumonitis or acute respiratory distress syndrome, or even pneumonitis, pericarditis, and aseptic meningitis.[19][20][21]
Evaluation
The most important aspect of the workup of these patients is to obtain an occupational history of the patient. Smoking, alcoholism, and drug use are standard parts of social history. But how the patient spends the day, either with occupation or avocation, may play a particularly important role in raising the suspicion of the practitioner for the emergency practitioner, occupational physician, pulmonologist, or other health care provider. The fact that the patient works as a welder in the galvanization process is a common clue for diagnosing metal fume fever. Failure to engage in an occupational and hobby history may result in missing this diagnosis, and the patient may repeatedly expose themselves to unsafe conditions without a mask, adequate ventilation, and prolonged work hours. Chemistry, coagulation parameters, and chest X-ray are all usually normal or unchanged from baseline. There may be a small degree of leukocytosis.[22]
The patient's C-reactive protein is elevated, but it is non-specific.[23] In general, testing is not indicated unless another process is strongly suspected. Zinc oxide (ZnO) exposure during welding increases the polymorphic nucleated white blood cells in the bronchial lavage fluid but is not associated with changes in bronchospasm or pulmonary function.[18] Occasionally in more severe cases, there may be pneumonitis or even acute respiratory distress syndrome (ARDS).[19]
Treatment / Management
The illness is mostly mild and self-limited. Treatment should be symptom-based with antipyretics for the fever, and fluids may be given if there is dehydration. Occasionally oxygen is needed for the treatment of hypoxemia. If bronchospasm is prominent, inhaled beta-agonists and glucocorticoids may be helpful. A chest X-ray may be helpful in the rare cases of pneumonitis, more typically due to cadmium.[6][1](B3)
Differential Diagnosis
The astute clinician will note the association between occupation, exposure, and symptomatology in metal fume fever. The differential diagnosis includes:
- Cadmium pneumonitis[7]
- Covid-19
- Influenza
- Hemophilus influenza
- Parainfluenza
- Polymer fume fever
- Respiratory syncytial virus
- Viral illness
- Viral pneumonia
Pertinent Studies and Ongoing Trials
Based on a six-year longitudinal study, there is an association between hypertension and welding. Neurodegenerative diseases are associated with manganese welders.[24] Manganese welded to steel makes a particularly hard variety of steel, such as used in rock crushers or bars over windows in prisons. Toenail metal concentration has been used as a biomarker of cumulative metal fume exposure.[25]
Prognosis
This illness is typically a benign process resolving in one-half to 2 days. With continued exposure, the symptoms are cyclical, with improvement on Sunday and marked exacerbations on Mondays and Tuesdays. There is an age-related decline in pulmonary function that is greater in metal fume welders than in the typical population.[26]
Complications
In the case of severe hypersensitivity pneumonitis, bilevel-positive airway pressure (BiPAP) and endotracheal intubation may be considered.
Deterrence and Patient Education
Occupational health personnel or industrial hygienists should assess the workplace environment. Workers and artisans should maintain their head and face away from the fumes and avoid breathing them. Also, it is often necessary to increase ventilation in the work zone and provide sufficient exhaust in the area where people are working. Workers should wear appropriate protective masks and work clothing. Safety education must be in place wherever welding is ongoing. In the United States, one may request a Health Hazard Evaluation involving the National Institute of Occupational Safety and Health (NIOSH), including a workplace visit. N95 masks have become standard protection for welders, but are not as effective as elastomeric half-face masks, full-face respirators, and powered air-purifying respirators.[27][28][9]
The National Institute for Occupational Safety and Health (NIOSH) has recommended 5 mg per cubic meter averaged over a 10-hour shift and 40-hour work week. According to NIOSH, the maximum for short-term 15-minute exposure is 10 mg per cubic meter.
Enhancing Healthcare Team Outcomes
Occupational exposure to toxins, such as metals and metal fume fever, presents a clear opportunity for interprofessional communication and a healthcare team approach. Welding and metal-to-metal bonding are necessary industrial activities, but they must exist in a safe environment. Clinicians (MDs, DOs, NPs, and PAs) and nurses must be astute at picking up the weekly variations in symptoms such as fever and wheezing. Occupational histories are the most crucial element, considering that adults generally spend about one-third of every day involved with their occupation. Often there is a need to maximize safety measures with well-fitting masks and minimize exposures to toxins, such as fresh zinc oxide. In addition, smoking cessation should also be pursued for these workers.
Patients working in conditions where metal oxides may be generated should have a well-fitted mask, and employers should provide appropriate time limits for exposure while welding. Also, other workers may be exposed at the same workplace, and some may have symptoms but not seek medical attention. A conscientious employer will seek those co-workers who may also be exposed and experiencing symptoms. An astute provider can communicate with the employer. In the USA, the National Institute of Occupational Safety and Health may initiate a Health Hazard Evaluation (HHE) for an entire workplace, as can similar agencies in other parts of the world. These safety processes can be initiated by alert clinicians, nurses, and pharmacists, among others, and can spare an entire workplace from further injury. In addition, advice to the patient about protective gear for a home welder or recreational "do-it-yourselfer" may be crucial in preventing this condition, especially since the hobbyist welder may not reveal their exposure and may not exhibit the weekly cyclical pattern seen in professional welders.
Clinicians and other healthcare providers must remain vigilant for these workplace injuries. The weekly variation in peak expiratory flow rate and the exposure to welding oxides may be all that is necessary to institute precautions and evaluate the workplace. Any interprofessional team member who detects these symptoms or discerns the weekly cyclical nature of this condition should reach out to other medical team members so appropriate interventions can take place in the workplace, leading to improved immediate and long-term health outcomes. [Level 5]
References
Greenberg MI, Vearrier D. Metal fume fever and polymer fume fever. Clinical toxicology (Philadelphia, Pa.). 2015 May:53(4):195-203. doi: 10.3109/15563650.2015.1013548. Epub 2015 Feb 23 [PubMed PMID: 25706449]
Greenhow EH. On Brass-Founders' Ague. Medico-chirurgical transactions. 1862:45():177-87 [PubMed PMID: 20896186]
Kunimasa K, Arita M, Tachibana H, Tsubouchi K, Konishi S, Korogi Y, Nishiyama A, Ishida T. Chemical pneumonitis and acute lung injury caused by inhalation of nickel fumes. Internal medicine (Tokyo, Japan). 2011:50(18):2035-8 [PubMed PMID: 21921392]
Level 3 (low-level) evidenceWardhana, Datau EA. Metal fume fever among galvanized welders. Acta medica Indonesiana. 2014 Jul:46(3):256-62 [PubMed PMID: 25348190]
Kaye P, Young H, O'Sullivan I. Metal fume fever: a case report and review of the literature. Emergency medicine journal : EMJ. 2002 May:19(3):268-9 [PubMed PMID: 11971851]
Level 3 (low-level) evidenceAhsan SA, Lackovic M, Katner A, Palermo C. Metal fume fever: a review of the literature and cases reported to the Louisiana Poison Control Center. The Journal of the Louisiana State Medical Society : official organ of the Louisiana State Medical Society. 2009 Nov-Dec:161(6):348-51 [PubMed PMID: 20108830]
Level 3 (low-level) evidenceKoons AL, Rajasurya V. Cadmium Toxicity. StatPearls. 2024 Jan:(): [PubMed PMID: 30725651]
Schraufnagel DE. The health effects of ultrafine particles. Experimental & molecular medicine. 2020 Mar:52(3):311-317. doi: 10.1038/s12276-020-0403-3. Epub 2020 Mar 17 [PubMed PMID: 32203102]
Rafiee A, Laskar I, Quémerais B. Investigating the field effectiveness of respirators against metal particle exposure in various workplaces: a systematic review. Reviews on environmental health. 2022 Jun 27:37(2):201-210. doi: 10.1515/reveh-2020-0174. Epub 2021 May 17 [PubMed PMID: 33991467]
Level 1 (high-level) evidenceFarrell FJ. Angioedema and urticaria as acute and late phase reactions to zinc fume exposure, with associated metal fume fever-like symptoms. American journal of industrial medicine. 1987:12(3):331-7 [PubMed PMID: 3674025]
Level 3 (low-level) evidenceEl-Zein M, Infante-Rivard C, Malo JL, Gautrin D. Is metal fume fever a determinant of welding related respiratory symptoms and/or increased bronchial responsiveness? A longitudinal study. Occupational and environmental medicine. 2005 Oct:62(10):688-94 [PubMed PMID: 16169914]
Baumann R, Joraslafsky S, Markert A, Rack I, Davatgarbenam S, Kossack V, Gerhards B, Kraus T, Brand P, Gube M. IL-6, a central acute-phase mediator, as an early biomarker for exposure to zinc-based metal fumes. Toxicology. 2016 Dec 12:373():63-73. doi: 10.1016/j.tox.2016.11.001. Epub 2016 Nov 2 [PubMed PMID: 27816692]
Blanc PD, Boushey HA, Wong H, Wintermeyer SF, Bernstein MS. Cytokines in metal fume fever. The American review of respiratory disease. 1993 Jan:147(1):134-8 [PubMed PMID: 8420406]
Kuschner WG, D'Alessandro A, Hambleton J, Blanc PD. Tumor necrosis factor-alpha and interleukin-8 release from U937 human mononuclear cells exposed to zinc oxide in vitro. Mechanistic implications for metal fume fever. Journal of occupational and environmental medicine. 1998 May:40(5):454-9 [PubMed PMID: 9604183]
Hirano S, Sakai S, Ebihara H, Kodama N, Suzuki KT. Metabolism and pulmonary toxicity of intratracheally instilled cupric sulfate in rats. Toxicology. 1990 Dec 3:64(3):223-33 [PubMed PMID: 2267662]
Level 3 (low-level) evidenceWesselkamper SC, Chen LC, Gordon T. Development of pulmonary tolerance in mice exposed to zinc oxide fumes. Toxicological sciences : an official journal of the Society of Toxicology. 2001 Mar:60(1):144-51 [PubMed PMID: 11222881]
Level 3 (low-level) evidenceEl-Zein M, Malo JL, Infante-Rivard C, Gautrin D. Prevalence and association of welding related systemic and respiratory symptoms in welders. Occupational and environmental medicine. 2003 Sep:60(9):655-61 [PubMed PMID: 12937186]
Cooper RG. Zinc toxicology following particulate inhalation. Indian journal of occupational and environmental medicine. 2008 Apr:12(1):10-3. doi: 10.4103/0019-5278.40809. Epub [PubMed PMID: 20040991]
Cha EW, Jeon D, Kang D, Kim YK, Kim SY. Chemical Pneumonitis Caused by the Inhalation of Zinc Oxide Fumes in an Arc Welder. International journal of environmental research and public health. 2022 Jun 29:19(13):. doi: 10.3390/ijerph19137954. Epub 2022 Jun 29 [PubMed PMID: 35805612]
Barbee JY Jr, Prince TS. Acute respiratory distress syndrome in a welder exposed to metal fumes. Southern medical journal. 1999 May:92(5):510-2 [PubMed PMID: 10342899]
Level 3 (low-level) evidenceHassaballa HA, Lateef OB, Bell J, Kim E, Casey L. Metal fume fever presenting as aseptic meningitis with pericarditis, pleuritis and pneumonitis. Occupational medicine (Oxford, England). 2005 Dec:55(8):638-41 [PubMed PMID: 16314334]
Level 3 (low-level) evidenceKim JY, Chen JC, Boyce PD, Christiani DC. Exposure to welding fumes is associated with acute systemic inflammatory responses. Occupational and environmental medicine. 2005 Mar:62(3):157-63 [PubMed PMID: 15723880]
Reisgen M, Thomas K, Beilmann V, Markert A, Gerhards B, Krichel T, Schmidt K, Kraus T, Martin C, Brand P, Krabbe J. Increased Neutrophil Granulocyte and Myeloperoxidase Levels Indicate Acute Inflammation Due to the Exposure of Zinc- and Copper-Containing Welding Fumes. Journal of occupational and environmental medicine. 2020 Aug:62(8):618-627. doi: 10.1097/JOM.0000000000001905. Epub [PubMed PMID: 32404823]
Bowler RM, Nakagawa S, Drezgic M, Roels HA, Park RM, Diamond E, Mergler D, Bouchard M, Bowler RP, Koller W. Sequelae of fume exposure in confined space welding: a neurological and neuropsychological case series. Neurotoxicology. 2007 Mar:28(2):298-311 [PubMed PMID: 17169432]
Level 2 (mid-level) evidenceTaj T, Gliga AR, Hedmer M, Wahlberg K, Assarsson E, Lundh T, Tinnerberg H, Albin M, Broberg K. Effect of welding fumes on the cardiovascular system: a six-year longitudinal study. Scandinavian journal of work, environment & health. 2021 Jan 1:47(1):52-61. doi: 10.5271/sjweh.3908. Epub 2020 Jul 29 [PubMed PMID: 32725248]
Christensen SW, Bonde JP, Omland O. A prospective study of decline in lung function in relation to welding emissions. Journal of occupational medicine and toxicology (London, England). 2008 Feb 26:3():6. doi: 10.1186/1745-6673-3-6. Epub 2008 Feb 26 [PubMed PMID: 18302754]
Cho HW, Yoon CS. Workplace field testing of the pressure drop of particulate respirators using welding fumes. The Annals of occupational hygiene. 2012 Oct:56(8):948-58. doi: 10.1093/annhyg/mes015. Epub 2012 Apr 26 [PubMed PMID: 22539557]
Mitra A, Adhikari A, Martin C, Dardano G, Wagemaker P, Adeoye C. Evaluation of a Filtering Facepiece Respirator and a Pleated Particulate Respirator in Filtering Ultrafine Particles and Submicron Particles in Welding and Asphalt Plant Work Environments. International journal of environmental research and public health. 2021 Jun 14:18(12):. doi: 10.3390/ijerph18126437. Epub 2021 Jun 14 [PubMed PMID: 34198698]